Guide P120V Handbuch Seite 4

GB CN ES DE FR RU
prevent possible damages.
• The device is powered by a lithium-ion battery so users must follow the
following precautions strictly in order to use it safely:
• Never try to open or dismantle the battery.
• Do not place the battery in a high temperature environment or nearby a
high temperature object.
• Do not short-circuit the battery.
• Do not put the battery in a moist environment or in the water.
• Once the liquid leaked from the battery enters eyes, flush the eyes with clear
water immediately and take corresponding medical cares.
• Please charge the battery as introduced in the manual and follow the
charging steps and precautions. Wrong charging may heat or damage the
battery or even cause injuries.
• Wipe the device as described below:
1) Non-optical surfaces: Use clean and soft cloth to wipe non-optical
surfaces of the thermal imager when necessary.
2) Optical surfaces: Please avoid staining the optical surface of lens
when using the thermal imager, especially avoid touching the lens
with hands since the sweat on the hands may leave traces on the lens
and corrode the optical coating on the lens surface. When the optical
lens surface is stained, wipe it with special lens wiping paper.
Precautions for use of batteries:
• The battery can be charged repeatedly. However, the battery is a vulnerable
part. If standby time of the device is largely shortened, please replace its
battery with an original one provided by the company.
• If the device operates for a long time especially at high temperatures, its
surface will warm up normally. When it's hot, please stop charging it and
move it to the shade. Please avoid touching hot surfaces for a long time.
2