Set Emissivity - Guide P120V Handbuch

2. Select the palette icon, as well as white heat, black heat, iron oxide red, hot
iron, medical, and Arctic ribbons as needed.
3.6 Turn on floodlight and flashlight
Steps:
1. Click on the camera screen to pop up the menu toolbar.
2. Click on one of the followings:
• Flash (use the thermal camera light as flash when taking pictures).
• Floodlight (turn on the thermal camera light and use it as a flashlight).

3.7 Set emissivity

Emissivity parameter set according to the type of measured object surface
Steps:
1. Click on the camera screen to pop up the menu toolbar.
2. Select "Setting" to enter the setup menu.
3. Select the emissivity and display the following two ways:
Custom: Display a list of parameter values, and you can select one of them.
Material: Emissivity of common objects.
3.8 Set reflective temperature
This parameter is used to compensate for the radiation reflected by the object.
Steps:
1. Click on the camera screen to pop up the menu toolbar.
2. Select "Setting" to enter the setup menu.
3. Select "Reflective Temperature" and the corresponding values.
3.9 Change distance
This parameter refers to the distance between the target and the camera lens.
Steps:
1. Click on the camera screen to pop up the menu toolbar.
2. Select "Setting" to enter the setup menu.
3. Select the distance and set it according to the target object.
GB CN ES DE FR RU
9