Cleaning And Disinfection - Beurer IH50 Gebrauchsanweisung

8

Cleaning and disinfection

Warning
Observe the following hygiene instructions
in order to avoid any health risks.
• The nebulizer and accessories are in-
tended for multiple use. Please note
that cleaning requirements differ ac-
cording to the different application ar-
eas:
Notes:
• Do not clean the mesh or accessories
with brushes or similar, as this may
cause irreparable damage, and this will
mean that the intended result of the
treatment is no longer guaranteed.
• For additional requirements regarding
the necessary hygienic preparations
(hand washing, handling of medicines
or inhalation solutions) in high-risk
groups (e.g. cystic fibrosis patients),
contact your doctor.
Cleaning
The mesh nebulizer and the accessories
used, e.g. mouthpiece, mask, Connecting
piece, etc. must be cleaned with hot water
after each use. Carefully dry all components
using a soft cloth. Once all components are
fully dry, gather them together and place
them in a dry, sealed container, or continue
with disinfection.
• Remove the mouthpiece and any ac-
cessories from the nebulizer.
• Add 6 ml of clean water to the medicine
container (2) and switch on the device
to remove any medicine residue from
the mesh first. (Please spray the entire
liquid).
• Remove the batteries.
• Remove the detachable parts from the
device, e.g. mesh nebulizer or medicine
container and cover.
• The nebulizer is later reassembled in
the reverse order.
Important
Never hold the complete device or
nebulizer unit (2, 3) under running wa-
ter to clean it.
When cleaning, ensure that all residues are
removed and dry all parts carefully. Never
use any substances that may be poisonous
when in contact with the skin or mucous
membranes, or when swallowed or inhaled.
If required, you can clean the device casing
with a slightly damp cloth that has been soa-
ked in mildly soapy water.
29