Frequently Asked Questions (Faqs); In The Madrix - MADRIX STELLA Kurzanleitung & Technisches Handbuch

Frequently Asked Questions (FAQs)

What do the blinking LEDs on the device mean?
Please read the chapter 'Description Of Status LED Codes' (see p. 10).
How can I change the IP address?
You can use the built-in web configuration tool (see p. 9).
The current IP address cannot be reached. What can I do?
You could perform a reset to factory default settings (see p. 10).
Does the device support RDM?
Yes. RDM is supported by MADRIX
Is it possible to use more than one MADRIX
Yes. Art-Net or Streaming ACN is recommended for large projects by connecting
multiple devices to a switch (1 GBit/s) via suitable components to create a
network or use the built-in daisy-chain support (see p. 5).
Where do I activate the ArtSync sync mode?
®

In the MADRIX

5 Software, it can be activated under 'Preferences...' > 'Device
Manager...' > tab 'Art-Net' > 'ArtSync'.
Where can I find the latest firmware update?
Use the MADRIX
Can I use other controllers apart from MADRIX
Yes. When using MADRIX
combination with other compatible software, consoles, and controllers.
Do I need a MADRIX
If you want to use MADRIX
and sold separately.
Can I repair MADRIX
No. Do not attempt any repairs. Any attempt will void your warranty (see p. 2)!
What can I do if my unit does not work anymore?
Please contact your dealer or supplier if the device seems to be defective.
13 13
DE EN
® HARDWARE MANAGER Software (see p. 12).
® STELLA as a standard network node, you can use it in
® STELLA and a MADRIX
®
5, yes. The MADRIX
®
STELLA myself?
®
STELLA (see p. 9).
®
STELLA?
®
® 5 License on a MADRIX
®
5 software license is necessary
5 to control fixtures?
® KEY?