Further Information; Technical Support - MADRIX STELLA Kurzanleitung & Technisches Handbuch

How To Update The Firmware
It is highly recommended to always update devices to the latest firmware.
MADRIX ® HARDWARE MANAGER is a separate software for basic device
configuration and to perform firmware updates. It is available for download from
www.madrix.com
firmware files.
Step 1) Connect devices to your computer over USB or network, but not both!
Step 2) Make sure to stop sending control data to the devices!
Step 3) Start the MADRIX
the tab 'Devices' > column 'Firmware' and select the new firmware
from the list for your devices.
For more information, see the MADRIX

Further Information

Digital documentation files, including this technical manual, the general user
manual, as well as the datasheet are available online at
They are also downloaded automatically by the MADRIX
Software. Go to the tab 'Devices' > Right Mouse Click on a selected device >
'Show Documentation Directory...' to access them.

Technical Support

In case of further questions concerning handling of MADRIX
problems, use the following resources for troubleshooting:
– Read the MADRIX
– Contact your dealer
– Have a look at the website and online forum at
– You can also directly contact
and requires an active internet connection to download
®
HARDWARE MANAGER Software and navigate to
®
STELLA User Manual
info@madrix.com
®
HARDWARE MANAGER User Manual.
help.madrix.com
®
HARDWARE MANAGER
www.madrix.com
® STELLA or technical
EN
12