Frequently Asked Questions (Faqs); In The Madrix - MADRIX NEBULA Technisches Handbuch

Frequently Asked Questions (FAQs)

What do the blinking LEDs on the device mean?
Please read the chapter 'Description Of Status LED Codes' (see p. 14).
How can I change the IP address?
You can use the built-in web configuration tool (see p. 13).
The current IP address cannot be reached. What can I do?
You could perform a reset to factory default settings (see p. 14).
Does the device support RDM?
Yes. The device can provide its own status and sensor data via ArtRdm (acting
as RDM Responder)..
Is it possible to use more than one MADRIX
Yes. Art-Net or Streaming ACN are recommended for large projects by connecting
multiple devices to a switch (1 GBit/s) via suitable components to create a
network or use the built-in daisy-chain support (see p. 5).
Where do I activate the ArtSync sync mode?
®

In the MADRIX

5 Software, it can be activated under 'Preferences...' > 'Device
Manager...' > tab 'Art-Net' > 'ArtSync'.
Where can I find the latest firmware update?
Use the MADRIX
Can I use other controllers apart from MADRIX
Yes. When using MADRIX
in combination with other software applications, consoles, and controllers.
Do I need a MADRIX
If you want to use MADRIX
and sold separately.
Can I repair MADRIX
No. Do not attempt any repairs. Any attempt will void your warranty (see p. 2)!
What can I do if my unit does not work anymore?
Please contact your dealer or supplier if the device seems to be defective.
17 17
DE EN
®
HARDWARE MANAGER Software (see p. 16).
®
NEBULA as a standard network node, you can use it
®
NEBULA and a MADRIX
® 5, yes. The MADRIX
®
NEBULA myself?
®
NEBULA?
® 5 to control LEDs?
®
5 License on a MADRIX
® 5 software license is necessary
®
KEY?