TEUFELBERGER treeMOTION essential Gebrauchsanleitung Seite 5

1.1. EXPLANATION OF THE
MARKING ON THE HARNESS
Arborist's Saddle
Modell: Product name
Size: S / M / L
Material: materials used in the
harness
Controll-No: number identifying the lot
Ser.-No: year of manufacture -
serial number
Month/year of manufacture: two digits
for month /four digits for
year
must be discarded at the latest by:
month/year of latest
theoretically possible
withdrawal from service.
Actual life span may be
much shorter. Consult
Instructions for Use!
Max. load: 150 kg / 330 lbs
Maximum allowable free-fall: 600mm
There must not be a chance
of a free fall.
Warning – not to be used for fall arrest!
"Free fall" does however not mean e.g. slipping of the
user's feet. This is limited to 600mm
Indication informing the user that it is neces-
sary to read the Instructions for Use
Only competent users should use this equiment!
manufacturer
Certificates see overleaf:
Look on the back of the label for information on certifi-
cation and standards
The European standard symbols for washing of textiles
and their care are used.
In accordance with:
EN 358: Standard for belts for work
positioning and restraint
and work positioning lanyards
EN 813: Standard for Sit harnesses
CE 0408 : The CE mark certifies compliance with the
fundamental requirements of regulation (EU)
2016/425. The number identifies the testing
institute (e.g., 0408 for TÜV Austria Services
GmbH, Deutschstrasse 10, A-1230 Vienna,
Austria).
CSA Z259.1-05 PD: Canadian standard on body belts
and saddles for work positioning and travel
restraint – group PD for work positioning and
descent
MH49855: UL file number – identifying certification to
CSA
AS/NZS 1891.1:2020: Australian/New Zealand Standard
for industrial fall-arrest systems and devices –
part 1: harnesses and ancillary equipment!
BMP 695816: licence number –
identifying certification to AS/NZS
ASTM F887-20 type A: US American standard spec-
ifications for personal climbing equipment –
aborist saddle type A
ANSI Z133-2017: US-American standard for arboricul-
tural operations
Extra labels are attached to the rings as required by
AS/NZS 1891.1:2020
LIMITED FALL
LIMITED FALL – MUST USE WITH
OPPOSITE RING
POLE STRAP – MUST USE WITH
OPPOSITE RING
GeneRaL
5