Vestfrost R-90i Bedienungsanleitung Seite 25

EN
SET THE PASSWORD FOR ADVANCED SETTINGS:
BACK
PASSWORD
SET THE TEMPERATURE PROFILE:
BACK
TEMPERATURE
Before use:
• Ensure the ambient temperature is witin the range og 5°C and 35°C�
• Make sure the appliance has been in a stable and levelled upright position for
at least one hour before pushing "ON" �
• Allow the appliance to operate at the desired temperature for a minimum of
12 hours before loading�
• Make sure there min 60 mm of space on all sides and above the appliance�
• Clean the inside o´f the cabinet using warm water with a mild detergent� Use
soft cloth rinse with clean water and dry thoroughly�
PROFILE
- service code
NEXT
- selection of the desired temperature profile
NEXT
- recommendations for use and installation
and choice to activate the unit or use the
"DEMO" mode
Vestfrost Solutions 25