Bialetti SUPER CF69 Gebrauchsanleitung Seite 49

For every following coffee, pull the lever (7) up to insert a new cap-
sule.
NOTE: By pulling the lever (7) up, the capsule used is automatically
ejected into the compartment of used capsules (11).
NOTE: Coffee dispensing can be stopped at any time by pressing one of
the two pouring push buttons.
WHEN THE WATER FINISHES DURING OPERATION:
When the light of On/Off button blinks red means the water tank is
empty.
Eject the capsule pulling the lever. Close the lever WITHOUT insert any
new capsule. Fill the water tank up to the MAX level.
Press one of the two brewing button and wait for the machine to com-
plete the water circuit filling cycle.
Once all the lights turn steady green, the machine is ready to use.
THE MACHINE IS EQUIPPED WITH AN APPOSITE
SENSOR, WHICH ALLOWS TO USE THE MACHINE WITH
ALUMINIUM CAPSULES ONLY.
IN CASE OF PLASTIC CAPSULES, THE MACHINE DOES
NOT DISPENSE COFFEE, THE LIGHTS OF THE POURING
PUSH BUTTONS AND THE LIGHT OF THE ON/OFF
BUTTON WILL BLINK RED FOR ABOUT 3 SECONDS.
WHEN TRYING TO DISPENSE WITHOUT CAPSULE, THE
MACHINE WILL NOT DISPENSE COFFEE, THE LIGHTS
OF THE POURING BUTTONS AND THE ON/OFF BUTTON
WILL BLINK IN RED FOR ABOUT 3 SEC.
6. Coffee making
EN
49