BASF nyloflex Combi FI Super Bedienungsanweisung Seite 8

- 11 PHILIPS TL 40W/10R tubes for the post-exposure and 8 PHILIPS TUV 30 tubes
for the UVC exposure are assembled in a drawer.
- A set of LEDs (one/each tube) informing in case of misfunctioning during the lighting.
- Inside forced air circulation to cool the tubes.
- Fumes exhausting from the outside central blower.
- Plate-holder in a drawer.
- UVA exposure time from 1 to 999 min.
- UVC exposure time from 1 to 999 min.
- Countdowns on DISPLAY. The word END appears when the time set is finished.
- Interruption of the countdown and of the lamp's function when opening the drawer.
Closing it, everything starts again.
- A numerical key allows to read the working hours of the lamps on the display and
to reset after the lamps replacement.
- Dryer thermically isolated.
- Two tangential fans, with a 500W electrical resistance each, providing warm air
circulation in the dryer.
- 4 plate-holding drawers.
- Fumes exhausting flow control in the rear of the machine
- Temperature adjusted at a max. of 65°C. Constant visualization on displays.
- Four timers (one/each drawer) from 1 to 999 min. Countdown on the display. The
word "END" appears at the end of the time set.
POST-EXPOSURE
DRYER
7