DENIOS. base-line 2FK Betriebsanleitung Seite 23

Operating instructions
Fitting the load securing support:
Remove the grid from the spill pallet.

Mount the load securing support in the required position on the grid using the U shaped bolt,

washers and nuts supplied (Fig. 4.4.3).
Run the strap around the stored goods and through the strap guides on the load securing device
then pull the strap tight to secure the goods (Fig. 4.4.4).
225296_Auffangwanne_bl_2_und_4_
Faesser_Operating-instr_009_INT
Fig. 4.4.4
Fig. 4.4.3
Output 01/2020 page 23 of 60