Stop Control Unit - swim-tec CL2 Deluxe WiFi 1,6 l/h Bedienungsanleitung

MODE
1 2
Pressing the Mode button takes you to Setting mode.
In Menu mode, all key parameters may be changed.
The Menu mode is exited automatically after 3 minutes in the event of a lack of
activity. When switching into Menu mode, the current operating state is saved, the
dosing time halted and the control unit stopped.
If relevant parameters have been changed, the control units start up again when the
mode is exited (dosing time starts from the beginning), otherwise the dosing time is
continued.
The following settings can be made in the sub-menu items:

3.1 Stop control unit

Now press the OK button. The control unit jumps back into operating mode. The dosing
pumps are now locked. STOP is shown on the display. No chemicals are added to the
pool water. The measurement of the pH value and the Redox voltage is continued.
Activate the control unit the next time the menu is called. Briefly pressing the OK
button lifts the lock on the dosing pumps. The control unit is again in operating mode.
Menu/menu cancellation
1
OK
2
Arrow buttons
3 Selection
3
35