Vehicles Equipped With Air Bags - Motorola PMPN4607 Handbuch

Vehicles Equipped with Air Bags

WARNING: Read these instructions carefully and save them for future reference.
• Do not place or install equipment in the area over an air bag or in the air bag deployment
area. Air bags inflate with great force. If equipment is installed in the air bag deployment
area and the air bag inflates, the equipment may be propelled with great force and cause
serious injury to occupants of the vehicle.
• To avoid serious injury, ensure the communication equipment in properly installed.
• Installation of vehicle communication equipment should be performed by a qualified
professional installer or technician. Air bag size, shape, and deployment area can vary by
vehicle make, model, and front compartment configuration such as bench seat, bucket seats
and others.
• Contact the vehicle manufacturer corporate headquarters, if necessary, for specific air bag
information for the vehicle make, model, and front compartment configuration involved in
your communication equipment installation.
• If mounted on an insecure or hollow mounting surface, the bracket can loosen and the unit
can break free on collision. To solidly anchor into a metal surface, mount the bracket only in
a location which allows the self-tapping screws.
• The mounting screws can damage cables and wires that run under the mounting surfaces in
the vehicle. Contact the vehicle manufacturer for the detailed locations of cables and wires
in your vehicle. Avoid mounting the radio above the cable locations.
MN008301A01-AB
Foreword
9