Washing; Accumulator Maintenance; Engine Maintenance; Check Of Oil Level In Engine - Seco AJ 102 Bedienungsanleitung

MACHINE MAINTENANCE

7.3.2 WASHING

Avoid washing with water in vicinity of the electrical equipment on the control panel, accumulator, etc. Do not use high-pressure devices.
Carry out the washing in the following way:
• Carry out the washing of the mowing machine including the attached grass collecting bin on an even surface.
• Wash the mowing mechanism from inside including the inner parts of the discharging tunnel.
• Take down the grass collecting bin, wash it and leave it to dry freely.
• Sponge the plastic parts of the machine with soapy water.
• Slip a hose of the appropriate diameter onto the extension pieces placed on the cover of the mowing mechanism and flush the mowing mechanism
with water for 10 minutes. The flushing, which is carried out with the engine and mowing mechanism running, is to be carried out immediately after
the end of every mowing.
7.4

ACCUMULATOR MAINTENANCE

Carry out the accumulator maintenance according to the instructions included in the accumulator operating instructions.
7.5

ENGINE MAINTENANCE

Carry out the engine maintenance according to the instructions included in the engine operating instructions.

7.5.1 CHECK OF OIL LEVEL IN ENGINE

Carry out the check of oil level in engine according to the instructions included
in the engine operating instructions.

7.5.2 OIL CHANGING

The engine is provided with an oil drain screw.
• Place a flat vessel having capacity of 2 litres minimally and prop up the machine on the opposite
side than the drain screw is in order that all oil will flow-out from the engine
• Unscrew the drain screw and release the oil filler cap in order that the oil will better and faster flow-out
from the engine.
• Screw in the drain screw back, fill the engine with the correct quantity of oil specified
(see the engine operating instructions) and close the oil filler cap.
• Take the drained oil to the place of the used oils liquidation.

7.5.3 FUEL FILTER REPLACEMENT

Carry out the fuel filter replacement according to the instructions included in the engine operating instructions.

7.5.4 AIR FILTER MAINTENANCE

Carry out the maintenance according to the instructions included in the engine operating instructions.

7.5.5 SPARKING PLUG MAINTENANCE

Carry out the maintenance according to the instructions included in the engine operating instructions.
7.6

LUBRICATION

Carry out the lubrication according to the lubrication
chart, the checks of functions including the maintenance
according to the summary in the chapter 7.1.
Bearings of tightening rollers, guiding rollers and bearings
of mowing mechanism are self-lubricating.
Before the machine storage for a longer time lubricate
thoroughly all places which require the lubrication.
grease
SAE 30 oil
interval in hours
All manuals and user guides at all-guides.com
21
ENGLISH