Positioning The Modules; Lisa Sterilizer Configuration; Connection Of Usb Reader To Pc/Mac Computer - W&H Lisa log64 Bedienungsanleitung

Positioning the Modules

CAUTION:
Do not arrange the modules near heat sources (i.e. behind
the sterilizer).
On the sterilizer do not obstruct the aeration holes of the
water recovery tank.
CAUTION:
Install Lisa log 64 so that the signalling is easily visible
and abnormal conditions promptly identified and possible
data loss avoided (e.g. power supply black out or
incomplete data saving).
Lisa log 64 can be installed and can operate correctly in any
position; we suggest however not to use the module with the
memory card towards the bottom in order to avoid unplugging the
card through vibrations or impacts.

LISA sterilizer configuration

No setting required.
Lisa log 64 is compatible with all LISA MB17 and LISA MB22 sterilizer. Moreover which printer is selected in the
sterilizer software is not relevant.

Connection of USB reader to PC/MAC computer

The saved data on the MMC memory can be read, copied and printed with a PC or Macintosh computer equipped
with a compatible interface slot.
The USB reader supplied allows the use of MMC memories on PC/MAC not provided with MMC reading slot and
equipped with a port USB 1,1 or higher.
To install the USB reader on your PC/MAC, proceed as follows:
- Turn on the PC/MAC;
- Connect the USB cable between the reader and the available USB port of the PC/MAC;
- Follow the instructions of the operating system.
N.B. Most of the operating systems recognize the reader and automatically proceed with the installation of the
device. Other operating systems request the installation of the disc; in these cases follow the instructions to
complete the installation; for any additional information refer to the handbook supplied with the USB reader.
Upon completion of the installation of the USB reader driver, the MMC card will be seen as a removable peripheral
memory device on which it is possible to perform any file copy, movement, reorganization and opening operations.
CAUTION:
Before unplugging the memory from the USB reader, make sure that all the operations being performed
have been ended, otherwise it is possible to damage the memory or lose the data. Some operating
systems allow for the removal of the peripheral device safely via a proper function.
6
NOT
NOT
NOT