Installation; Connections - W&H Lisa log64 Bedienungsanleitung

Caution: Before starting the installation, turn off the sterilizer and disconnect the mains cable from the
socket.

Connections

Install Lisa log 64 digital recorder as follows:
- Turn off the LISA sterilizer;
- Connect the parallel interface cable between the printer port of the sterilizer and the parallel port of the
recorder module;
- Plug the power supply output cable in the Lisa log 64 socket;
- Connect the mains cable between the power supply module and an available mains socket;
- Switch on the sterilizer;
- Plug the memory MultiMediaCard into the slot of the Lisa log 64 in the orientation indicated in the
diagram.
LISA sterilizer
- Printer port -
Parallel interface
cable

INSTALLATION

Power supply
To mains socket
Mains cable
LisaLog64 recorder
MultiMediaCard
5