Safety Notes - AL-KO BC 1000 E Betriebsanleitung

neither is it intended to be used by people lacking
experience and/or knowledge unless they are
supervised by someone who is responsible for
safety, or receive instructions from this supervisory
person in how to operate the tool. Children should
be supervised in order to make sure that they do
not play with the tool.
Important!
The machine is not allowed to be used in
commercial applications!
Meaning of the symbols on the machine
Important!
Read the instructions for use
Wear protective glasses and ear
defenders
Wear protective gloves
Wear safety boots
Keep people away. Safety distance
min. 10 m
Danger due to objects being thrown out
Immediately disconnect the plug from
the mains if the extension cable has
been damaged or cut
Protect the machine against rain and
moisture
Make sure there is a gap of at least
15 m between the machine and other
people
440 102 _a

Safety notes

Important!
The cutting tool continues to rotate even after the
motor has been switched off!
Before using mains and extension cables, check them
„
for any signs of damage or ageing.
Keep extension cables away from the cutting tools.
„
If the cable becomes damaged during use,
„
immediately disconnect from the mains.
DO NOT TOUCH THE CABLE UNTIL IT HAS BEEN
DISCONNECTED FROM THE MAINS.
Wear suitable clothing, eye protection and gloves.
„
Never allow children or uninstructed persons to
„
operate or maintain the machine. Local regulations
may specify the minimum age of people operating the
machine.
Stop using the machine when people, especially
„
children (and also pets) are in the vicinity.
Only mow during daylight hours or with good artificial
„
lighting.
Before taking the machine into operation, and following
„
any impact, check the machine for signs of wear or
damage and undertake the necessary repairs.
Never use the machine if any protective devices are
„
damaged or missing.
Always keep hand and feet away from the cutting
„
device, above all when switching on the motor.
Any device that is used for cutting off the line
„
represents a danger of injury.
After pulling out a new line, always hold the machine in
„
its normal working position before switching it on.
Never fit metallic cutting elements.
„
Only use genuine spare parts and genuine
„
accessories.
Disconnect the mains plug before carrying out any
„
checks, cleaning or work on the machine, and when it
is not in use.
Make sure that air openings are free from
„
contamination.
In spite of technical and additional protective
„
measures, there is always a residual risk when working
with the machine.
Keep handles dry and clean.
„
Remove foreign bodies from the working area.
„
Only use the machine if it is in perfect technical
„
condition.
Always keep the guard plate, spool head and motor
„
clear of mowing residues.
GB
13