Creating A New Pulse Switching Program - Grasslin talento easy B1 Bedienungsanleitung

Creating a new pulse switching program

Pulse mode is only possible when multifunction is active (Ä Chapter "Activating multi func-
tion" on page 90).
15:00 h
Fig. 30: Example of a pulse switching program
Components of a pulse switching command:
• (Fig. 30/ ) Start time
1
• (Fig. 30/ ) Duration = switching ON
2
− Shortest ON switching duration: 1 second
− Longest ON switching duration: 1 minute
Example
The channel will be switched on daily from Monday to Friday at 3:00 p.m. to 5:00 p.m. for a duration of
30 seconds.
The pulse switching program should be run annually from 01/06 to 30/09.
EN
103