Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Creating a new cycle switching program
Cycle mode is only possible when multifunction is active (Ä Chapter "Activating multi func-
tion" on page 90).
9:00 h
Fig. 28: Example of a cycle switching program
Components of a cycle switching command:
•
(Fig. 28/
) Start time
1
•
(Fig. 28/
) Permanently ON = switching ON
2
•
(Fig. 28/
) Permanently OFF = switching OFF
3
To end the cycle, an independent "OFF" command must be set. The nesting of cycle pro-
grams is not permitted.
Example
The channel is switched on every 30 minutes for 10 minutes, Monday to Friday, from 9:00 a.m. to
7:00 p.m.
The cycle switching program should be run annually from 01/06 to 30/09.
Switching
Start time
Permanently ON
Permanently OFF
Separate OFF command
19:00 h
Cycle
9:00 a.m.
10 minutes
30 minutes
7:00 p.m.
EN
100
Werbung
Inhaltsverzeichnis
