Selecting The Operating Mode - Grasslin talento easy B1 Bedienungsanleitung

Selecting the operating mode

In this menu, different operating modes can be activated or deactivated. The last entered setting has the
top priority.
When the operating modes are deactivated, the clock timer is in automatic mode.
Possible settings
Permanently ON
Permanently OFF
Override mode ON
Permanently ON
MANUAL
PERM ON
Fig. 15: Permanently ON operating mode
1. Press the
2. Select
MANUAL
3. Confirm
PERM ON
4. o end the permanently ON operating mode, confirm
T
Channel is permanently switched on.
Channel is permanently switched off.
In override mode, the current program is temporarily overwritten.
• Start a program early that is set to start later with "Override mode ON".
The override function only applies to the current program and remains active
until the next automatic command. Then the device returns to automatic mode.
Example:
A daily program switches the device on every day from 8:00 a.m. to 5:00 p.m.
If, however, you want the device to be on at 6:00 a.m. on a certain day, use the
override mode.
MANUAL
button.
and confirm with the
with the button to start the permanently ON operating mode.
STOP PERM ON
button.
STOP PERM ON
with the button.
EN
85