Husqvarna FS 600 E Bedienungsanweisung Seite 5

Risk of cut injuries. Keep all body parts
away from the cutting blade.
Keep body parts away from the cutting
blade and other moving parts.
Make sure that the cutting blade is not
blunt or has damages, such as cracks.
The blade guards must always be
installed on the product. Do not let more
than 180° of the cutting blade show.
Make sure that the cutting blade is
applicable to the same speed or a
higher speed than the value given on the
product. A cutting blade that is operated at
too high speed can break and cause injury
or damage.
WARNING: The dust can cause health
problems. Use an approved respiratory
protection. Always make sure that there is
good airflow.
WARNING: Do not look into the beam.
This warning is only applicable when the
light kit is installed.
Use hearing protection, eye protection
and respiratory protection. Refer to
Personal protective equipment on page
9 .
Risk of electrical shock: Inspection and/ or
maintenance must be done with the motor
stopped and the plug disconnected.
All displacement of the machine outside
the cutting area shall be carried out with
the tool not in rotation.
Remove the blade before transportation,
when you lift, put on or remove the
product.
The arrow on the blade guard shows in
which direction the cutting blade rotates.
1620 - 003 - 28.02.2022
Engage/disengage the parking brakes.
N P
Fill tank only with water.
Valve for the water cooling systems for
the cutting blade.
Lift/lower control for cutting depth
adjustment.
Always lift the product at the lifting point.
Protective earth.
ON button.
OFF button.
Machine stop button.
Light switch for working light.
Motor ON/OFF button, error indicator.
Noise emission to the environment label
as refer to EU and UK directives and
regulations. The guaranteed sound power
level of the product is specified in
Sound levels on page 27 , Declaration of
Conformity on page 30 and on the label.
Risk of electrical shock. This equipment
is to be serviced by approved personnel
only.
5