Gin Gliders Switch2 Bedienungsanleitung Seite 9

CONNECTING THE RISER CARABINER
The riser carabiner connection has 2 harness straps that must be attached, however the 2 webbings are
connected together for convenience. Follow the image to the RIGHT to properly connect the riser carabiner
to the harness webbing. The RIGHT side of harness has BLUE webbing connection, the LEFT side of the
harness has a RED webbing connection to match GIN Glider risers for a safe and easy connection.
QUICK-OUT Carabiners are not compatible with the Switch 2.
WARNING:
Forgetting to close the leg straps may
place the pilot at risk of falling out of the harness
BLUE webbing indicates the RIGHT side of the harness.
6