Gin Gliders Switch2 Bedienungsanleitung Seite 11

RESCUE INSTALLATION AND COMPATIBILITY CHECK
Gin Gliders recommend that rescue installation is performed properly by a competent person. The rescue
parachute is a pilots last resort and failure to pack or connect the reserve parachute in the correct way may
cause death or severe injury. The pilot is responsible for ensuring proper installation.
This harness is compatible with the Yeti UL, G-Lite, Yeti and Yeti Cross rescue parachutes. Other
manufacturers' rescues may also be used but we cannot guarantee their function. The pilot is responsible for
checking compatibility.
Every first installation of a rescue system into the harness (that means every new combination of harness
and rescue system) must be checked by a qualified paragliding professional for compatibility. To verify the
installation, you must perform a test deployment by sitting in a simulator.
Rescue parachutes should be repacked at least every 150 days; so installing your rescue in a new harness
may also provide a good opportunity for a repack. After every repack of the rescue parachute you should
also do a compatibility check.
RESCUE COMPATIBILITY
MAKE SURE THAT THE RESCUE PARACHUTE CAN BE RELEASED FROM THE RESCUE CONTAINER —
it must be done by you, the pilot, sitting in the harness hanging from a simulator.
WARNING:
If you are in any doubt about any
aspect of rescue installation, seek professional advice!
IMPORTANT:
You must perform a test deployment
from a simulator to verify the correct installation.
8