Gin Gliders Switch2 Bedienungsanleitung Seite 16

OPTION 1
1
1
After connecting the rescue to rescue
bridle, insert rescue with handle facing
UP
5
Pass the handle wire through the closing
loop in front
2
Move zipper to the shown position
6
Pass the handle wire through the
second closing loop in the back
3
Pass the parachord through the closing
loops
7
Secure the handle wire in the housing
left and right as shown and slowly
remove parachords
4
Use paracord to pull the closure loops
through the secondary loops. Start to do
up the zippers for 10cm
8
Secure rescue handle in the pocket and
close the flap as shown
13