Gin Gliders Switch2 Bedienungsanleitung Seite 12

THE RESCUE DEPLOYMENT BAG AND THE HARNESS DEPLOYMENT HANDLE
The rescue container for this harness comes with its own deployment handle. This handle and its strap must
be connected to the deployment bag of the parachute. In particular, check the length of the strap connecting
the rescue deployment handle to the rescue inner container. It should be long enough that the reserve can
be extracted without the danger of the pins not being pulled before the strap tightens on the reserve, but not
so long that there is excessive slack that extends the movement required for deployment.
The deployment bag of other manufacturers' rescue systems (i.e. non-GIN rescue systems) may have di erent
loop positions which may cause a deployment failure. Be sure to contact your parachute dealer or a qualified
professional to check the connection, position and secure deployment, and refer to the rescue manual for
details.
The rescue handle and inner container supplied with the Switch 2 should already be connected.
INNER BAG
IMPORTANT:
The deployment bag of other
manufacturers' rescue systems may have di erent loop
positions which may cause a deployment failure.
* Rescue and handle may di er
9