Clock Button; Sleep Function - Blaupunkt Arrifana 08C Bedienungsanleitung

Arrifana 08C

CLOCK BUTTON

1. To set the correct time of the day, press the CLOCK button.
2. The clock display will flash; set the clock using the UP/DOWN button.
3. Each time the UP or DOWN button is pressed the minute display will
increment/decrement by 1. After the correct time is set press the CLOCK button to store
the set time.

SLEEP FUNCTION

Under this function the unit maintains the room temperature and humidity at optimum level
with silent operation. The unit will run in a preset programmed algorithm which will vary the
set temperature after every preset time interval. The unit will be turned off after 8 hours and
will be in STANDBY mode.
Fan speed cannot be adjusted and is always set to low under this function.
TO SET
1. Select the desired mode of operation – Cool/Dry or SMART.
2. Press the SLEEP button, sleep icon will appear on the display and the remote which will
indicate the unit is set in SLEEP function.
3. In SLEEP function if the unit is running in COOL mode, after each hour the set temperature
is increased by 1°C, this happens for the first two hours after which the unit will run at
(set temperature + 2°C) for remaining 6 hours before it is switched off.
www.blaupunkt.com
20