Pkm IF 4 Bedienungsanleitung Seite 33

A(mm) B(mm) C(mm) D
760
Before the installation
 The worktop must be rectangular and plane and made of heat-resisting material.
Structural elements should not interfere with the installation area.
 The installation must meet the safety requirements as well as the legal rules and
regulations.
 The wall sat the hob should be covered with heat-resistant material, e.g. ceramic
tiles.
After the installation
 The power cable must not come into contact with cabinet doors or drawers.
 The appliance must be supplied with an adequate flow of fresh air from outside
the cabinet to the base of the hob.
 Install a thermal protection below the bottom of the appliance when installing it
above a drawer or a cupboard.
 The circuit breaker must be easily accessible.
Installation of the fixing brackets
1. The hob must be installed by a qualified professional. Do not carry
out the installation yourself.
2. Do not install the appliance above cooling equipment, dish washers
or laundry dryers.
3. When installing the appliance ensure optimal heat radiation to
maintain the operating safety.
50 min. 20 min. Air inlet Air outlet 5 mm
CAUTION!
33
E