Product Description And Specifications; Intended Use; Product Features - Bosch PPR 250 Originalbetriebsanleitung

OBJ_BUCH-1513-004.book Page 16 Tuesday, November 26, 2013 4:07 PM
16 | English
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Symbols
The following symbols can be important for the operation of
your power tool. Please memorise the symbols and their
meanings. The correct interpretation of the symbols helps
you operate the power tool better and more secure.
Symbol Meaning
 Wait until the rotor has come to a
complete stop. Touching a rotating
rotor can lead to injuries.
Adapting the height-adjustable paint-
bucket coupling to the height of the paint
bucket:
base unit must always stand level on the
floor.
leftward
Pump lock engaged (pump
function possible only in this
position)
rightward
Pump lock disengaged

Product Description and Specifications

Intended Use

The machine is intended only for painting water-based disper-
sion wall paint.
Use the machine only when you can fully assess all functions
and handle them without limitation, or after having received
appropriate instructions.
2 609 006 717 | (26.11.13)

Product Features

The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Paint applicator extension
2 Feed hose
3 Paint applicator
4 Intake hose
5 Base unit
Paint applicator
6 Remote control holder
7 Trigger switch
8 Remote control (PaintControl system)
9 Extension handle
10 Screw connection of extension
11 Paint applicator handle
12 Guide groove for feed hose
13 Feed-hose connection on paint applicator
14 Bucket holder
15 Roll holder
16 Paint roll
17 Roll axle
Base unit
18 On/Off switch
19 Carrying handle
20 Pump lid
21 Holding clamp
22 Paint filter
23 Pump lock
24 Pedestal
25 Pump-hose connection
26 Feed-hose connection on base unit
27 Double-SDS-connector
28 Pump-hose holding clip
29 Height-adjustable paint-bucket coupling
Components for cleaning
30 Mixing-nozzle spanner
31 Water tap-adapter with gasket
32 SDS connection on paint filter
33 Pump hose
34 Bypass hose
35 Rotor
36 Paint distributor
37 Paint chamber
38 Distributor plate
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Bosch Power Tools