Herunterladen Inhalt Inhalt Diese Seite drucken

CONQUEST PB160LPG Bedienungsanleitung Seite 4

Inhaltsverzeichnis

Werbung

90°
6
1. INTRODUZIONE
ATTENZIONE: Prima di
utilizzare la macchina leggere
attentamente questo libretto
di istruzioni.
N.B: Tutti gli strumenti che si renderanno
necessari per la protezione personale
dell'utilizzatore ad
mascherine per evitare di nalare polveri
nocive,occhiali a lenti bianche, chiavi
ed utensili per eseguire registrazioni o
sostituzioni in genere sono di fornitura
1
dell'utilizzatore.
2. PREPARAZIONE
La macchina giunge imballata su pallet,
coperta da telo in plastica. (Fig.1)
Peso e dimensioni della
macchina sono ripetute nel
capitolo CARATTERISTICHE
TECNICHE.
Dopo aver tolto l'imballo occorre:
1) Togliere il tassello dalla ruota posteriore.
Fig 1.
2) Nel caso non fosse possibile avviare
il motore, per muovere la macchina, è
necessario ruotare di 90° la leva posta
sopra la pompa a portata variabile Fig.2
A fine operazione ricordarsi di rialzare
la leva.
3) Fare scendere la macchina a marcia
indietro con uno scivolo 6 della larghezza
adeguata alla macchina ed avente una
2
lunghezza di almeno 60 cm.Vedi Fig.4
3. CONDIZIONI
AMBIENTALI CONSENTITE
• Temperatura minima di utilizzo: -20°C(-4°F)
• Temperatura massima di utilizzo: +40°C(+104°F)
ATTENZIONE: NON UTILIZZARE E
NON LASCIARE IN SOSTA CON
3
TEMPERATURE AL DI SOPRA
DI 45°C (+113°F)
4
1. INTRODUCTION
ATTENTION: Read this
instruction handbook through
carefully before using
the sweeper.
N.B: Everything necessary for personal
protection of the user such as gloves,
esempio guanti,
masks to prevent the inhalation of harmful
dust, goggles with clear lenses, wrenches
and tools for
parts, are
normally provided by the user.
2. PREPARATION
The sweeper is delivered packed on a pallet and
covered with a plastic sheet. (Fig.1)
After removing the packing:
1) Remove the insert of the rear wheel. See
Fig. 1.
2) If it is not possible to start the engine,
to move the machine, you must turn
90° the lever located above the variable
displacement pump Fig.2
When the operation remember to raise
the lever.
3) Let the machine go down in reverse
through a suitably large chute 6 having a
length of at least 60 cm. See Fig. 4.
3. PERMITTED
• Minimum operating temperature: -20°C (-4°F)
• Maximum operating temperature: +40°C(+104°F)
ATTENTION: NEVER USE
OR PARK THE SWEEPER IN
THE CASE OF TEMPERA-
TURES ABOVE + 45°C (+113°F)
4
adjusting or replacing
The weight and dimensions of
the sweeper are given in the
TECHNICAL DATA chapter.
ENVIRONMENTAL CONDITIONS

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis