Package Contents; Description (Fi G. A); Electrical Safety - DeWalt DC308 Handbuch

Do not charge damaged battery packs
Do not use damaged chargers
Charge only between 4 °C and 40 °C
Have defective cords replaced
immediately
Charger problem
Battery problem
Discard the battery pack with due care
for the environment
Do not incinerate the battery pack
Charge only with dedicated D
chargers

Package contents

The package contains:
1 Cordless jigsaw
1 Saw blade set
1 Anti-splinter shoe insert
1 Anti-scratch shoe cover
1 Dust extraction shroud
1 Dust extraction adapter
1 Battery pack (DC308K/DC318K)
2 Battery packs (DC308KL/DC318KL)
1 Charger
1 Kitbox (K-models only)
1 Instruction manual
1 Exploded drawing
NOTE: Battery packs and chargers are not
included with N-models.
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. A)
WARNING: Never modify the power tool
or any part of it. Damage or personal
injury could result.
1 Variable speed switch
2 Safety lock
3 Sawdust blower control
4 Blade latch
5 Finger guard
6 Blade holder
7 Guide roller
8 Shoe
9 Pendulum stroke selector
10 Shoe lever
11 Battery pack
12 Release button
13 Charger
14 Charging indicators (red)
INTENDED USE
The DC308, DC318 heavy-duty jigsaws are
designed for professional cutting of wood, steel,
aluminium, plastic and ceramic material at various
work sites (i.e., construction sites).
WALT
E
DO NOT use under wet conditions or in presence
of fl ammable liquids or gases.
These heavy-duty jigsaws are professional power
tools.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.

Electrical Safety

The electric motor has been designed for one voltage
only. Always check that the battery pack voltage
corresponds to the voltage on the rating plate.
Also make sure that the voltage of your charger
corresponds to that of your mains.
Your D
in accordance with EN 60335; therefore no
earth wire is required.
WARNING: 115 V units have to
be operated via a fail-safe isolating
transformer with an earth screen between
the primary and secondary winding.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
D WALT service organisation.
E
E N G L I S H
WALT charger is double insulated
E
37