Startup / Operation - BOMANN GS 195.1 Bedienungsanleitung, Garantie

NOTE:
 Ask another person to assist.
You possibly need:

driver as well as a thin-blade screwdriver.
 Remove the screw caps on the device cover,
loosen the screws and remove the device cover.
 Move the blanking cap of the device cover to the
opposite side.
 Dismount the upper door hinge and lift the appli-
ance door.
 Tilt the appliance slightly backwards and block it
in this position. Unscrew the feet and disassemble
the lower door hinge.
 Transfer and fasten the lower door hinge to the
opposite appliance side after unscrewing the
hinge pin and replacing it from the other hinge
side. Screw in the feet.
 Put the appliance back in the upright position.
Put on the appliance door and fix it in its intended
position.
 Transfer and attach the upper door hinge to the
opposite appliance side.
 Transfer and attach the upper door hinge to the
opposite appliance side after changing the posi-
tion of the hinge pin holder and the blind plug.
 Attach the device cover and put on the screw
caps again.
screw wrench, Phillips screw-
Check that the door is optimally aligned both vertical-
ly and horizontally to ensure a smooth opening and
closing of the door.

Startup / Operation

Prior to first use
CAUTION:
After transport, the appliance should be left standing
upright for four hours before connecting to the power
supply. Nonobservance could lead to malfunction of
the cooling system and causes an appliance break-
down.
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
the chapter "Cleaning and Maintenance".
Starting the appliance
 Connect the appliance to the power supply.
 Operate the temperature control. See also the
section "Settings".
Settings
The power levels [ MIN – MAX ] regulate the different
values of the internal temperature.
Setting MIN:
Lowest setting (warmest inside temperature)
Setting NORMAL:
Medium setting (optimal operating temperature)
Setting MAX:
Highest setting (coldest inside temperature)
Note that the temperature will change depending on
the ambient temperature, frequency of door opening
and the amount of food in the appliance.
During initial operation, turn the temperature control
to the highest setting first, until the appliance has
reached the desired operating temperature. After-
wards it is recommended to turn the control back to a
17