Beko SPM6126R Bedienungsanleitung Seite 15

Troubleshooting
5
Although the appliance is plugged in, soleplate (5) does not heat up.
The appliance may be connected improperly. >>> Check the plug and power
cable (1) of the appliance.
Temperature setting button (3) may be at the Min. position. >>> Turn the
temperature setting button in the clockwise direction up to the steam sign.
The appliance does not generate steam.
The water reservoir may not have enough water. >>> Fill the water reservoir
with water up to Max level (see. 3.3).
Temperature can be too low and therefore Anti-Drip Sensor may have stopped
steam generation. >>> Turn the temperature setting button (3) in the clockwise
direction up to the steam sign. Wait for the soleplate (5) to get warm and
thermostat indicator (10) to turn off.
Shock Steam – Vertical Steam does not function.
These functions may have been used too frequently in a very short period of time.
>>> Keep ironing at a horizontal position and wait for a while before using the
shock steam function again. >>> Soleplate (5) may not be hot enough. Turn the
temperature setting button (3) in the clockwise direction up to the steam sign.
Seat the appliance in a vertical position and wait for the soleplate to heat up.
Water drops fall down onto the fabric during ironing.
You may not have securely closed the water refill lid (7). >>> Close the water
refill lid securely.
You may be using the shock steam at temperature level • or ••.
>>> Increase the temperature level (see. 3.7).
During ironing, sediments and residues fall down from the soleplate (4).
If the water you use for your appliance is too hard, such sediments may form. >>>
Use the self-clean function for once or a few times (see. 4.2). For the subsequent
ironings fill the water reservoir of the appliance with a mixture of tap water and
potable water.
The appliance drops water after it cools down or stored.
You may have left the appliance on a horizontal position while there is water in its
reservoir. >>> Empty the water reservoir.
Stains at the soleplate (5).
Wet garments might have been ironed and the soleplate (5) has had lime stains.
>>> After the appliance cools enough, wipe the soleplate with a microfiber
knitted or cotton cloth soaked in vinegar.
15 / EN
Steam Iron / User Manual