Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
20
SUBSTRUCTURE
1.
Drill 4 holes of Ø 6mm at the bottom of the hanging cupboard.
2.
Put the one way valve on the air outlet of cooker hood, then install the cooker
hood on the bottom of the cupboard, tighten the cooker hood with enclosed 4
screws.
3.
Install the adjusted board on the bottom of the hood in order to keep out the
gap between hood back and cupboard.
60 cm
90 cm
70 cm
Werbung
Inhaltsverzeichnis
