Klarstein VIOLA Bedienungsanleitung Seite 21

• The angle of the exhaust pipe bend should not be less than 120°. Align the pipe
horizontally. Alternatively, the duct should go up from the starting point and be led
to an outer wall.
• After installation, make sure that the cooker hood is level to prevent grease from
accumulating on one side.
• Make sure that the exhaust duct selected for the installation complies with the
relevant standards and is fire-resistant.
Option 1: Mounting on the wall
1 First measure the distance between the mounting holes on the cooker hood.
Drill 2 8 mm diameter holes in the wall.
2 Insert the plugs into the holes.
3 Screw the screws into the wall.
4 Place the cooker hood on due screws and secure with locking screws. The
holes for the locking screws are located on the back of the housing and have a
diameter of 6 mm.
5 Finally, attach the one-way valve to the cooker hood.
EN
21