Securing The Refrigerator - Dometic RMD10 Serie Montageanleitung

Installing the refrigerator
4.6 Install the roof vent
No. in
fig. c, page 9
1
2
➤ Seal the installation frame to make the connection waterproof (fig. d, page 9).
➤ Insert the installation frame and screw it down tightly (fig. e, page 9). Use all the
fixing holes for this.
➤ Insert the hood and screw it down tightly (fig. f, page 9).
4.7

Securing the refrigerator

!
CAUTION!
Only screw through the receptacles provided, otherwise foamed com-
ponents, such as cables, can be damaged.
I
NOTE
Attach the side walls or the attached strips so that the screws are tight,
even when under increased loads (while driving).
➤ Move the refrigerator into its final location.
➤ Fasten the six screws (fig. g 1, page 10) through the six plastic washers in the
sides of the refrigerator, and further into the wall.
➤ Put the caps (fig. g 2, page 10) onto the screw heads.
20
Description
Hood
Installation frame
RMD10
EN