Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Electrical installation
Important notes
DANGER!
Hazardous voltage!
On the power connections even when disconnected from the mains: residual voltage >60 V!
▶ Disconnect the product from the mains and wait until the motor is at a standstill.
▶ Make sure that the product is safely isolated from supply!
When working on energised products, comply with the applicable national accident
•
prevention regulations.
Carry out the electrical installation in compliance with the relevant regulations (e.g. cable
•
cross‐sections, fuses, PE connection).
The manufacturer of the system or machine is responsible for adherence to the limits
•
required in connection with EMC legislation.
Preparation
The notes for the electrical connection can be found in the enclosed mounting
instructions.
EMC-compliant wiring
The EMC-compliant wiring is described in detail in the documentation of the
Lenze inverters.
Electrical installation
Preparation
39
Werbung
Inhaltsverzeichnis
