Battery Replacement - Simons Voss Technologies ST10.08007M Kurzanleitung

8. Battery replacement

The PIN code keypad transmits the entered User PIN to the server
(SmartIntego: Integrator system) for verification and triggers the
following process:
1. The PIN code keypad sends a feedback signal accepting the User
2. The PIN code keypad transmits the User PIN entered to the Smart-
3. The PIN code keypad emits a positive feedback signal if the Smart-
4. The networked lock is activated via the SmartBridge if it matches
8 Battery replacement
To change the batteries, you must open the housing of the PIN code
keypad. For this you need a Torx screwdriver size 6 (not included in
delivery)!
IMPORTANT
Damage to the electronics due to fluids or static discharge
Do not touch electronics/components; do not allow them to come into
contact with oil, paint, moisture, alkali or acids.
44 / 184
PIN length if the right User PIN length has been entered. See
}
[ 46]
for more details.
Bridge (SmartIntego: Integrator system) via the network.
Bridge receives the PIN successfully (SmartIntego may differ). See
}
Signals [ 46]
for more details.
the User PINs specified in the web app (SmartIntego may differ).
MK/SI PinCode-Tastatur (on-
line)
Signals
EN