Changing The Master Pin - Simons Voss Technologies ST10.08007M Kurzanleitung

MK/SI PinCode-Tastatur (on-
line)

4.1 Changing the master PIN

You only need to carry out this step if no new Master PIN has been
programmed yet. You cannot start any configurations until you change
the Master PIN. The Master PIN can be changed at any time. No
programming is required to make a change. The Master PIN is unable to
open any locks.
NOTE
Enter the numbers consecutively. The PIN code keypad only signals the
pressing of the keys, but not completion of the individual steps in the
process.
1. Enter 000 0.
2. Enter the default or old Master PIN (default: 123 456 78).
3. Enter the new Master PIN.
4. Enter the new Master PIN again.
9
9
EN
PIN code keypad beeps and flashes green briefly twice.
9
The new Master PIN must consist of 8 digits and must not start
9
with 0.
PIN code keypad beeps and flashes green briefly twice.
The Master PIN has been successfully changed.
4. Configuration
39 / 184