Battery Replacement (Passive) Sc Version - Simons Voss Technologies Z4.PL Kurzanleitung

All manuals and user guides at all-guides.com
7 Battery replacement (Passive) SC
version
1. Place the installation/battery key on the knob in such
a way that its two teeth lock into the openings in the
locking disc; If necessary, turn the knob until both
teeth engage into the knob. Important: the battery/in-
stallation key must be placed flat on the inside front
surface of the recessed grip ring to ensure that the
installation tool can engage into the locking disc.
2. Hold the knob firmly and carefully turn the battery/in-
stallation key about 30° in a clockwise direction (until
you hear a click).
3. Remove battery/installation key from the knob.
4. Push recessed grip ring backwards towards the pad-
lock, so that it comes away from the thumb-turn.
5. Hold recessed grip ring firmly and turn knob about
10° in an anti-clockwise direction and remove.
6. Carefully press the battery holder together where
you see three small arrows, so that the antenna
bracket disengages.
7. Carefully fold the antenna bracket out (see diagram);
do not apply any mechanical load to it.
8. Optional: If a network card has been fitted, carefully
remove it from the holder.
9. Remove the top battery from the holder.
10. Turn the knob 180°, so that you can remove the
second battery. The battery will then automatically
drop from the holder.
11. Insert the new batteries into the holder at the same
time with the positive poles next to each other;
change the batteries as quickly as possible. Use
clean gloves free of fat or grease to handle new bat-
teries.
20
SimonsVoss Technologies GmbH