Set To Storage Mode - Simons Voss Technologies ST10.08007M Kurzanleitung

MK/SI PinCode-Tastatur (on-
line)
9

4.3 Set to storage mode

NOTE
If the PIN code keypad is to be used in a different system, the PIN code
keypad not only needs to be deleted in the configuration view, but also
set to storage mode.
The PIN code keypad can be reset to storage mode. This process also
deletes all network settings.
NOTE
Enter the numbers consecutively. The PIN code keypad only signals the
pressing of the keys, but not completion of the individual steps in the
process.
1. Enter 000 00.
2. Enter the Master PIN.
9
9
EN
The User PIN length has been successfully changed.
PIN code keypad beeps and flashes green briefly twice.
Storage mode set.
4. Configuration
41 / 184