MK/SI PinCode-Tastatur (on-
line)
1 Intended use
Use the PIN code keypad MobileKey to operate locking devices by
entering an authorised User PIN (see section on
You need to change the Master PIN and assign a User PIN to do so.
You can programme the PIN code keypad using the MobileKey web app
(SmartIntego: SmartIntego manager and integrator system). The PIN
code keypad is added as a "key" with PINs and assigned to a lock.
The PIN code keypad contains a LockNode with a "Chip ID" and is
assigned to the SmartBridge located within range when the network is
configured. If a correct user PIN length has been entered, the PIN is
transmitted to the server (SmartIntego: To integrator system) via
WaveNet, where it is evaluated.
2 General safety instructions
Signal word (ANSI Z535.6)
DANGER
WARNING
CAUTION
IMPORTANT
EN
Possible immediate effects of non-com-
pliance
Death or serious injury (likely)
Death or serious injury (possible, but un-
likely)
Minor injury
Property damage or malfunction
1. Intended use
}
Operation [
43]
).
31 / 184