Machine Features; Intended Use; Original Instruction/ Spare Parts List - Protool DRP 18-4 DEC FF Originalbetriebsanleitung

Original operating manual
The specified illustrations appear at the be-
ginning of the Operating Instructions.
1 Symbols
Warning of general danger
Risk of electric shock
Read the Operating Instructions/
Notes!
Wear ear protection.
Wear a dust mask.
Wear protective goggles.
Do not throw in the household waste.
Fastening / Drilling mode
Impact drilling mode
2

Machine features

[1-1] Bit store
[1-2] LED light switch
4 Technical data
Drill / Impact drill
Power
No-load speed
Impact count
Chuck clamping range
Max. drilling diameter
DRP 18-4 DEC FF/ PDP 20-4 DEC FF
[1-3] LED lamp
[1-4] Speed set button
[1-5] Switch for selecting drilling/fasten-
ing or impact drilling mode (only
PDP 20-4 DEC FF)
[1-6] Gear switch
[1-7] On/Off switch
[1-8] Right/left switch
[1-9] Mains power cable
[1-10] Belt clip
[1-11] Additional handle
3

Intended use

The machine
DRP 18-4 DEC FF
– was designed for drilling into wood, metal,
ceramic and plastic.
PDP 20-4 DEC FF
– was designed for impact drilling into tiles,
concrete and masonry as well as
– drilling into wood, metal, ceramic and plas-
tic.
Machines with forward/reverse setting are
also suitable for fastening screws and tap-
ping threads.
The user is liable for improper or non-
intended use.
DRP 18-4 DEC FF
1st gear 0 - 400
2nd gear 0 - 850
3rd gear 0 - 1900
4th gear 0 - 4000
1st gear
2nd gear
3rd gear
4th gear
Wood
Metal
Concrete
PDP 20-4 DEC FF
705 W
rpm
0 - 400
rpm
0 - 850
rpm
0 - 1900
rpm
0 - 4000
- 0 - 8200
- 0 - 17000
- 0 - 38000
- 0 - 79000
1,5 - 13 mm
50 mm
18 mm
20 mm
GB
rpm
rpm
rpm
rpm
rpm
rpm
rpm
rpm
11