Panasonic EY6950 Bedienungsanleitung Seite 8

. LAMP INDICATIONS
Red Flashing
Red Lit
Green Flashing quickly
Orange Lit
Orange Flashing
. ACCESSORIES
Use only bits suitable for size of drill's chuck.
RECOMMENDED SPEED SELECTION
CAUTION:
Use the following as a guide to select low or high speed for the job.
EY6950
MATERIAL/
CONDITION
MORTAR / BRICK
SPEED
ø 13 mm (1/2")
HIGH
LOW Not recommended
Charger is plugged into the AC outlet.
Ready to charge.
Now charging
Charging is completed.
Battery pack is warm. Charging will begin
when temperature of battery pack drops.
Charging is not possible. Clogged with
dust or malfunction of the battery pack.
WOOD /
YELLOW PINE
Thickness: 38 mm
(1-1/2") or less
ø 25 mm (1")
or less or less
ø 50 mm (2")
or less
- 8 -
DRILLING
METAL METAL HOLE SAW
Cold-rolled steel plate (SPC)
Thickness: 1.6 mm (1/16") or less
ø 13 mm (1/2")
or less
ø 13 mm (1/2") ø 34 mm (1-11/ 32")
or less
Not used
or less