ENGLISH
Operation
Switching on
Connect the mains plug to the power socket.
The display on the control panel turns on.
To change temperature, refer to the section for
temperature regulation.
When operating the appliance for the first time,
set the appliance at a colder temperature and
run it without loading any food until it auto
stops at the set temperature. Usually it takes
2 or 3 hours, then set a desired temperature and
put food in the appliance.
Switching off
To disconnect the appliance from the power
supply, disconnect the mains plug from the
power socket. The display on the control panel
turns off.
Locking/unlocking
•
If the door is closed and no button
operation occurs for 30 seconds, the control
panel will be locked and the
4
lock indicator on the display will turn on.
4
When the
lock indicator turns on, button
operation is invalid.
•
To lock or unlock the control panel, press
7
and hold the
control panel for 3 seconds. When the
control panel is unlocked, the
indicator on the display turns off and button
operation is available.
Refrigerator temperature regulation
•
The refrigerator compartment temperature
ranges from 2°C to 8°C, and the default
temperature is 5°C.
5
•
Press the
Refrigerator temperature
button on the control panel to change the
refrigerator compartment temperature.
To manually adjust the temperature of the
refrigerator compartment, deactivate the
following functions:
8
fast freezing and
Vacation button on the
4
lock
9
fast cooling,
3
vacation function.
Freezer temperature regulation
•
The freezer compartment temperature
ranges from -16°C to -24°C, and the default
temperature is -18°C.
6
•
Press the
Freezer temperature button
on the control panel to change the freezer
compartment temperature.
To manually adjust the temperature of
the freezer compartment, deactivate the
following functions:
8
fast freezing and
Adjust the temperature setting by keeping in
mind that the temperature inside the appliance
depends on:
•
room temperature
•
how often the door is opened
•
the quantity of food stored
•
the location of the appliance
Important! If the ambient temperature is
high or the appliance is fully loaded, and the
appliance is set to the lowest temperatures, it
may run continuously causing frost to form on
the rear wall. In this case a higher temperature
must be set to allow automatic defrosting and
therefore reduced energy consumption.
Fast cooling function
•
Press and hold the
temperature button on the control panel
for three seconds to activate the function.
When the function is activated, the
cooling indicator turns on.
•
When the function is activated, the
refrigerator compartment temperature is
automatically fixed at 2°C.
•
To deactivate the function, press and hold
5
the
Refrigerator temperature button for
three seconds again. The
indicator turns off.
Fast freezing function
•
Press and hold the
button on the control panel for three
seconds to activate the function. When the
function is activated, the
indicator turns on.
9
fast cooling,
3
vacation function.
5
Refrigerator
9
fast
9
fast cooling
6
Freezer temperature
8
fast freezing
13