Softmenu Setup - Abit IB9 Kurze Installationsanleitung

2.1 SoftMenu Setup

This option configures the CPU's clock and voltage.
Brand Name: Genuine Intel(R) CPU 3.60GHz
Frequency : 3.60GHz
Cache Size: 1024K
CPU Operating Speed
x - External Clock
x - Multiplier Factor
x - Estimated New CPU Clock
x - N/B Strap CPU As
x - DRAM Spec. (CPU:DRAM)
x - PCI Express Frequency
Voltages Control
x - CPU Core Voltage
x - DDR2 Voltage
x - MCH Voltage
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values
Brand Name
This item displays the CPU model name installed on this motherboard.
Frequency
This item displays the processor speed of the CPU installed on this motherboard.
Cache Size
This item displays the L2 cache size of your CPU.
CPU Operating Speed
This item displays the CPU operating speed according to the type and speed of your CPU. You
can also select the [User Define] option to enter the manual option.
User Define:
※
The wrong settings of the multiplier and external clock in certain
circumstances may cause CPU damage. Setting the working frequency higher
than the PCI chipset or processor specs, may cause abnormal memory module
functioning, system hangs, hard disk drive data lose, abnormal functioning of
the VGA card, or abnormal functioning with other add-on cards. Using
non-specification settings for your CPU is not the intention of this explanation.
These should be used for engineering testing, not for normal applications.
※
There will be no guaranty for the settings beyond specification. Any damage of
any component on this motherboard or peripherals resulting therein is not our
responsibility.
- External Clock
This item selects the external clock frequency. Due to the specification limit of the CPU you
installed, the speed you set over its standard bus speed is supported, but not guaranteed.
- Multiplier Factor
This item displays the multiplier factor for the CPU you installed.
- Estimated New CPU Clock
This item displays an estimated CPU processor speed.
2-2
Phoenix – AwardBIOS CMOS Setup Utility
SoftMenu Setup
3600(200)
200MHz
18 X
3.60GHz
By CPU
By SPD
100MHz
Default
1.3875v
1.80v
1.250v
F6: Fail-Safe Defaults
Item Help
F7: Optimized Defaults
IB9