English (Original Instructions); Technical Data; Cordless Impact Wrench - DeWalt DCF899 Bersetzt Von Den Originalanweisungen

EngLIsH

CORDLESS IMPACT WRENCH

DCF899, DCF899H
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Battery type
No load speed
Impact rate
Max torque
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to EN62841-2-2:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound
level)
Impact tightening of fasteners at the maximum capacity of the tool
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents impact tightening of fasteners of the
maximum capapcity of the tool. However if the tool is
used for different applications, with different accessories
or poorly maintained, the vibration and/or noise emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
24
WALT one of the
e
DCF899, DCF899H
V 18
DC
1/2
Li-Ion
min -1 0–400
0–1200
0–1900
min -1 0–2400
Nm 950
kg 2.7
dB(A) 101
dB(A) 112
dB(A) 3
2
m/s 13.0
m/s 2 5.9
EC-Declaration of Conformity
Machinery Directive
Cordless Impact Wrench
DCF899, DCF899H
D WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN62841-1-2015, EN62841-2-2:2014.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice President of Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
02.12.2019
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.

Denotes risk of electric shock.

Denotes risk of fire.
WALT at
e
WALT.
e