Instructions To User - Diamond G77/4F7T-N Handbuch

4.
IGNITING THE PILOT BURNER (COOKTOP)
To ignite the plaque pilot, press the knob (Fig. 7) turning it to the left to reach the symbol (
position, press the knob deeply down and ignite the pilot. Keep the knob pressed for approx. 20 seconds; when released, the
pilot flame should stay on. Should it go off, repeat the ignition operation. To ignite the burner, turn the knob to position (
the maximum, and to position (
IGNITING THE COOKING PLATE BURNERS
- To ignite the cooking plate pilot, press the knob (Fig. 8) and rotate it to the left to reach the symbol (
it, press the knob deeply down, at the same time pressing the piezoelectric ignition button; the button is located on the
dashguard. The pilot burner is visible through the peephole on the guard;
- Keep the knob pressed for approx. 20 seconds; on releasing it, the pilot flame should stay on. If the pilot goes off, repeat
the operation.
- To ignite and adjust the burner, turn the knob to the desired position, remembering that the following temperatures
correspond to the positions from 8 to 1:
POS.8 = 300°C
POS.7 = 280°C
POS.6 = 260°C
POS.5 = 240°C
- To shut off the burner, bring the knob back to position (
( ).
GB
) for the minimum. To shut off the burners completely, bring the knob to position (
POS.4 = 220°C
POS.3 = 190°C
POS.2 = 170°C
POS.1 = 150°C

INSTRUCTIONS TO USER

); for a total extinguishment, bring the knob back to position
- 18 -
); having reached this
) for
).
); having reached