Multi Display - Sony GXD-L65H1 Bedienungsanleitung

Available combination of two pictures
S Video
Video
RGB
RGB/YUV
Component
DVI
HDMI
1) Supported when "Display" is set to "YUV" or when "Option" is set to "RGB" in "RGB/YUV".
2) Supported when "Display" is set to "RGB" or when "Option" is set to "YUV" in "RGB/YUV".
Tip
Output from BKM-FW50 is considered as RGB output shown in the table in the "PAP" mode.

Multi Display

28
GB
RGB/YUV
S Video Video
RGB
a
a
a a
a a
a a a
a a a
Allows you to make settings for connecting multiple displays to form a video wall.
"Multi Display"
"Off": Uses a single screen.
"2×2"/"3×3"/"4×4": Sets to connect multiple displays such as 2, 3 or 4 displays
both vertically and horizontally.
"1×2"/"1×3"/"1×4": Sets to connect multiple displays such as 2, 3 or 4 displays
horizontally.
"2×1"/"3×1"/"4×1": Sets to connect multiple displays such as 2, 3 or 4 displays
vertically.
"Position": Select the position of each display in the arrangement of the video wall
with F/f/G/g. Press
"Output Format": Selection of two picture output formats will be available as
shown in the figures. By simply selecting either format, suitable picture output will
be available without manually adjusting the horizontal and vertical shift. Select
either "Tiles" or "Window".
"Tiles"
To show full signal on
each display.
DVI HDMI
Component
a a a
a a a
a a
a a
a
a
to set the position.
OPTION
RGB Component HDMI
a a
a a
2)
a
1)
a
a a
a a
"Window"
To show one large picture with
multi display naturally.
Part of the signal will go behind
the bezel area.
HD-SDI/
SDI
a a
a a
a a
a a