Filter Replacement - KKT KOLBE CURVE Benutzerhandbuch

Operating the hood
Setting the off timer
By briefly pressing the
operation, while the time display is flas-
hing, you can set a time after which the
appliance will automatically switch off:
By pressing the key again you can
choose between the minute numbers
15 / 30 / 45 / 60 / Off, with the
keys you can set the time precisely in
steps of 1 minute more or less each.
Wait briefly until the time display stops
flashing, then the countdown starts and
the display shows the remaining time
together with the
When the time has elapsed, the appli-
ance will automatically turn off with a
beep.
Quick-off timer (5 minutes)
If you hold down the
a few seconds, the off timer is automati-
cally activated with a 5-minute count-
down.
To deactivate the off timer / quick-off
Timer, press the
countdown.
32
key during fan
and
icon.
and keys for
key again during the

Filter replacement

After a total of 14 hours of operation,
the filter should be changed, which is
indicated by the icon.
To reset the display, press and hold the
key. After two beeps the icon will
disappear and the calculation of the
operating time will be restarted.
Total operating time display
In operating mode (without display of
the filter replacement icon), press and
hold the key. After two „beeps",
the display will show the total working
time and will flash together with the filter
replacement icon:
After 5 seconds without any action,
it will return to the operating mode.