Time Setting; Filter Replacement - KKT KOLBE BICOLORE Benutzerhandbuch

Operating the hood

Time setting

Setting the clock
Press and hold the
operation to start the time setting.
The hour display will flash first.
Set the hour by pressing the
keys. Now press the
The minute display will start flashing
and you can set the minutes by using the
and keys.
When the desired time is set, wait 5 se-
conds or press the
Setting the off timer
By briefly pressing the
operation, while the time display is flas-
hing, you can set a time after which the
appliance will automatically switch off:
By pressing the key again you can
choose between the minute numbers
15 > 30 > 45 > 60 > Off,
with the and
time precisely in steps of 1 minute more
or less each.
Wait briefly until the time display stops
flashing, then the countdown starts and
the display shows the remaining time
together with the
When the time has elapsed, the appli-
ance will automatically turn off with a
beep.
Quick-off timer (5 minutes)
If you hold down the
a few seconds, the off timer is automati-
cally activated with a 5-minute count-
down.
To deactivate the off timer / quick-off
Timer, press the
countdown.
34
key without fan
and
key again.
key to confirm.
key during fan
keys you can set the
icon.
and keys for
key again during the

Filter replacement

After a total of 14 hours of operation,
the filter should be changed, which is
indicated by the icon.
To reset the display, hold down the and
keys and . After two beeps the icon
will disappear and the calculation of the
operating time will be restarted.
Total operating time display
In operating mode (without display of
the filter replacement icon), press and
hold the keys and
After two „beeps", the display will
show the total working time and flash
together with the filter replacement icon:
After 5 seconds without any action, it
returns to the operating mode.
WiFi adjustment mode
If you press and hold
seconds in standby mode, the WiFi
adjustment mode will be activated
( Display symbol:
After the WiFi is connected, this symbol
will disappear and the appliance will
return to standby mode. If the wifi
doesn't match, this symbol will still be
displayed.
together.
and for 5
).